Foam Cutting Machines

Our wide range of circular foam cutting machine is fitted with stationary cutting unit and rotary circular table. In these circular foam cutting machine, cutting unit is welded with steel and have pretensioned knife guide. Weight of these machines is approximately 10 Tons.

Specifications of our machines are:

• Band Knife : The band knife is 30 mm wide and its service life is about 150 working hours. 2driven cup grinders grind the band knife during the operation
• Adjustment of layer thickness: Pre-selection of layer thickness in the range of 1.5 mm to 200 mm by vernier or by touch screen display from the control panel from
• 1.5mm to 999.9mm increments of 0.1 mm
• Cutting Speed: The cutting speed is infinitely adjustable between 0 to 5 R.P.M
• Splitting and stacking height: 1220 mm
• Power Required: 21 H.P.
• Space Required: 7x7 m. and 9x9 m.
• Table Diameter: 5.6m and 6.6 m.
• Loading Capacity: 915 mm. x 1830 mm. & 915 mm. x 1830 mm.

We have in store a wide range of Vertical Cutting Machine, which is used for cutting various material, such as PU, PE and PVC. Properly welded, these cutting units are appreciated for optimum performance and have dynamically balanced knife wheels. Tabletop of these machines is manufactured using aluminum sheet and has a knife guard hard metal sliding elements to maintain exact cutting position.

Specifications:

• Aluminum table top for free movement of P.U. Foam blocks
• Adjustable side support
• Strong table frame on bearing slides for easy operation
• Manual break for table for fast stopping
• Slitting section with four balanced blade wheels
• Blade-wheel diameter: 400 mm
• Upper and lower band knife guidance
• Electric blade drive motor
• Motorized Grinding Attachment with adjustable cup stones
• Cutting Height: 575, 1470 and 1200mm
• Cutting Length: 885 to 2280mm
• Power Required 2 HP, 2.25 HP, 3.25 HP.
• Approx. Weight: 350 Kg., 1200 Kg., 1600 Kg

We deal into manufacturing of Horizontal Cutting Machines, which is manufactured using quality raw material. This cutting unit is welded with steel and the table is manufactured using steel pipe that slides over track lines covered with hardened steel. Top of these machines is manufactured using wooden boards and is coated with special friction material.

Specifications:

• Band knife: 30 MM wide band knife runs over dynamically balanced knife wheels
• Motorized grinders sharpen the blade continuously, during cutting operation.
• Knife guide: It is pretensioned and coated with P.T. F.E.
• Thickness: Thickness can be pre set with the help of digital display in the range of 0 to 999 MM in steps of 0.1 MM.
• Table capacity: Automatic Horizontal Cutting Machine can take up to 4 blocks of 1828 mm X 915 mm (6' X 3') (High capacity tables are also available as per customer's selection).
• Power required: 12 H.P.
• Space required : 10 m X 5 M.

We are engaged in manufacturing a wide range of Block Cutter Machine, which is in wide demand across the globe. The frame of these machines is manufactured using welded steel and runs over four dynamically balanced knife pulleys. Customized as per the specifications of our clients, these are supplied at industry leading prices.

Specifications:

• Cutting height: 1.2 meters
• Cutting width: 1.2 meters to 2.2 Meters
• Operation: Fully Automatic
• H.P. required: 7.5 H.P.
• Approx. weight: 2 Tons

We are engaged in manufacturing and exporting a wide range of Edge Rounding Machines which has smooth cutting surface. These machines are highly efficient and are demanded for fast filling of foam at a rate of 700 to 1000 pillows per 8 hr shift.

Specifications:

• Safe, the blade is protected
• Former Size available: 75 mm to 125 mm
• Space required: 2.5 meter X 1.5 meter
• Power required: 1.25 H.P
• Continuous band saw blade rounds off the edges of a cushion

Our wide range of products is in wide demand across the globe. These are used for filling as well as re bonding pillows from crumbs of P.U. Foam waste. Designed as per the specifications of our clients, these machines are known for producing granule sizes from 10mm to 25mm.

Specifications:

• Power Required: 10 H.P
• Production Capacity: 200 Kg per 8 hr. shift (Approx.)
• Size of Shreds: Variable from 10 mm to 25 mm

We are one of the leading manufacturers, exporters and suppliers of a wide range of Side Trimming Machines. These are customized as per the specifications of our clients and are appreciated for following specifications:

• Distance between the blades is adjustable
• The distance between the blades is digitally indicated
• This machine is applied where peeling is done immediately after trimming
• Full control on the thickness of the side skin that is to be removed
• Saves time and labor